Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Ethernet Configuration Menu
Table 4-9
Ethernet Configuration Menu Option
Option
Description
Span to PC Port
Indicates whether the phone will
(applies to 7911G
forward packets transmitted and
only)
received on the network port to the
access port.
Enable this option if an application that
requires monitoring of the phone's
traffic is being run on the access port.
These applications include monitoring
and recording applications (common in
call center environments) and network
packet capture tools that are used for
diagnostic purposes.
Security Configuration Menu
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
The Ethernet Configuration menu displays whether the Span to PC Port option is
enabled on the phone (Cisco Unified IP Phone 7911G only).
the option.
The Security Configuration menu displays settings that relate to security for
phone.
You can view additional security information and unlock the CTL file from the
Security Configuration screen on a phone. For more information, see the
"Security Configuration Menu" section on page
Table 4-10
describes the Security Configuration menu options.
Device Configuration Menu
To Change
Use Cisco Unified CallManager
Administration to modify.
7-2.
Table 4-9
describes
4-21