Replacing The Transfer Belt - MINOLTA-QMS Magicolor 2200 DP User Manual

7
Rotate the two oil roller levers to lock the oil
roller into place.
Attention
If the two fuser oil roller release levers are
not correctly set, the top cover cannot be
closed. Set the release levers to the roller
fixed position.
8
Carefully close the top cover.
Check the release button to make sure the
top cover is properly closed.
9
Turn on the printer.

Replacing the Transfer Belt

When the transfer belt is at its end of life, the message "REPLACE TRANSFER BELT"
appears, and the printer does not print. Replace the transfer belt. After the new transfer
belt is installed, printing automatically resumes.
1
Open the printer's front cover.
2
Remove the waste toner pack.
3
Rotate the left transfer belt lock lever.
28 Replacing the Transfer Belt