Card type
Intel 70-W FPGA card
PM1725B 1.6 HHHL NVME card
PM1725B 3.2 HHHL NVME card
PM1725B 6.4 HHHL NVME card
P4800X 750GB HHHL PCIE card
Removing the expansion card riser assembly
Prerequisites
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications Commission
(FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow
inside the system.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Steps
1
Remove the screws that secure the expansion card riser assembly.
2
Lift the expansion card riser assembly out of the sled.
Figure 46. Removing the expansion card riser assembly
Next step
1
Install the expansion card riser
Form factor
Link
width
LP
x16
LP
x8
LP
x8
LP
x8
LP
x8
Safety
instructions.
Before working inside your
assembly.
Slot
Maximum number of cards
priority
4
1
4
1
4
1
4
1
4
1
enclosure.
Installing and removing enclosure components
99