Removing An Expansion Card - Dell EMC PowerEdge T340 DPJ1G Installation And Service Manual

Card Category
Priority
14 NIC
15 NIC

Removing an expansion card

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the air shroud.
4 Disconnect any cables connected to the expansion card.
Steps
1 If installed, disconnect the data cables from the PERC card.
2 Press the expansion card retention latch and push the latch downwards to open it.
Figure 56. Removing an expansion card
84 Installing and removing system components
Card Type
1 Gb NICs Dual Port (Broadcom)
1 Gb NICs Quad Port (Intel)
Safety instructions.
Before working inside your
Form Factor
Full Height
Full Height
system.
Slot Priority Maximum
Allowed
1,2,3,4 4
1,2,4 3