Figure 5-1: Locations Of Console Components (H2 Shown); Figure 5-2: Key Console Components (H2 Shown) - GE Discovery LS System Service Manual

GE H
EALTHCARE
D 2307224-100, R
IRECTION EVISION
Communications between the CT Host and SRU take place primarily using a network channel and
serial connections. Using the network channel allows sharing of resources on the CT Host disk by
the SRU (client). Serial communications are used for the downloading and "flashing" memory
(PROM) in the SRU when needed. Serial communications between the PET Workstation and the
CT Host are performed via a Null modem cable. For network communications, the PET Workstation
is connected into a fast ethernet switch located inside the Console.
The location of the cosole components are shown in
a connections diagram in
the H3 and GOC1 consoles.
DAT Drive
MOD Drive
(optional)
PET Computer
PET Computer
Page 108
6
Figure 5-3. These illustrations are for the H2, and may differ slightly for
DAT Drive
MOD Drive
(optional)

Figure 5-1: Locations of Console Components (H2 Shown)

Figure 5-2: Key Console Components (H2 Shown)

Chapter 5 - Console
D LS S
ISCOVERY
Figure 5-1, key components in
CT
S M
YSTEM ERVICE ANUAL
Figure 5-2, and