If A Ct Plug Is Required; Figure 6-83: Revisions 0, 1, And 2 Right Rails; Figure 6-84: Ct Plug - GE Discovery LS System Service Manual

GE H
EALTHCARE
D 2307224-100, R
IRECTION EVISION
6.2.6.30

If a CT Plug Is Required

1.) Refer to
in the seventh access hole from the front of the table.
2.) Use the following hardware to install the CT Plug into the seventh hole in the rail:
Part Number
2342039
46-312577P28
2236649
46-328432P8
46-328425P11
a.) Refer to
b.) Fasten the nuts and washers to the rail exterior and screws to the rail interior.
Page 170
6
Figure 6-83. If working with a Revision 0 rail, the CT Plug, P/N 2342039, is installed
Revision 0 Side Rail (Seven Access Holes)
CT Plug in seventh access hole.

Figure 6-83: Revisions 0, 1, and 2 Right Rails

CT Position Plug
M5 x 25 mm Socket-Head Cap Screw
M5 Flat Washer
M5 Lock Washer
M5 Hex Nut
Figure 6-84. Insert the plug from the inside of the table.
Mounting Holes
Exterior View
Chapter 6 - Table
Description
Mounting Holes
Interior (Inside the Table)

Figure 6-84: CT Plug

D LS S S
ISCOVERY YSTEM ERVICE
Quantity
1
5
5
5
5
M
ANUAL