Figure 4-4: Systems Reset - GE Discovery LS System Service Manual

GE H
EALTHCARE
D 2307224-100, R
IRECTION EVISION
Refer to
hardware as required to prepare the system for the scanning operation. Access Systems Resets
as follows:
1.) Select Systems Resets from the Service Desktop. The reset applications selections include:
a.) Scan - Resets and downloads all controllers in the gantry and table.
b.) Recon - Resets the recon subsystem (IG, RIP, and SDC boards).
c.) DAS/COLL - Resets the DAS control and collimator control board.
d.) Data Acquisition - Resets the DAS, control, collimator control, and DIP boards.
2.) Select Reset on the displayed screen.
3.) Select Run.
The status box displays the status of the selected reset.
Page 106
6
Figure 4-4. The System Resets function allows resetting and downloading the scanner
Click the appropriate button to reset an application.
Chapter 4 - Service Desktop, Tools and Diagnostics

Figure 4-4: Systems Reset

D LS S S
ISCOVERY YSTEM ERVICE
M
ANUAL