Figure 6-5: Remove The Etc Cover; Figure 6-6: Remove The Middle Support Bar And Bracket - GE Discovery LS System Service Manual

GE
HEALTHCARE
D 2307224-100, R
IRECTION EVISION
6.) Refer to
a.) If necessary, use a flat-blade screwdriver to loosen the two captive thumb screws that
b.) Set the cover aside.
7.) Refer to
a.) Use a 1/8 inch Allen wrench to remove the three M4 flat-head screws that fasten the
b.) Use a 5 mm Allen wrench to remove the two M6 socket-head screws that fasten the
c.) Follow local guidelines to discard or recycle the bar and bracket.
6
Figure 6-5. Remove the ETC cover.
fasten the cover into place.

Figure 6-5: Remove the ETC Cover

Figure 6-6. Remove the middle support bar and bracket for the ETC Cover.
middle bar into place.
bracket to ETC chassis.

Figure 6-6: Remove the Middle Support Bar and Bracket

Chapter 6 - Table
D LS S S
ISCOVERY YSTEM ERVICE
Middle Bar
Bracket on
ETC Chasis
Page 117
M
ANUAL