GE
HEALTHCARE
D
2307224-100, R
IRECTION
EVISION
6.2.6.15
Install the Clutch Driver Unit Power Cable (P/N 2338088)
Refer to
ETC ASM side of the filter. The lugs on the new power cable have dual connectors, so the original
wires re-plug in place.
1.) Refer to
2.) Refer to
3.) Route the other end of P/N 2338088 to the AC Filters.
4.) Refer to
connector into the left side of the filter.
6
Figure
6-45. Make a mental note of the wire color before disconnecting A1 and A2 on the
Figure
6-45. Remove the wires from A1 and A2 of the ETC ASM side of the filter.
Figure
6-44. Fasten Cable P/N 2338088 to J200 of the Clutch Driver Unit.
Note colors.
Figure 6-45: Filter Before Upgrade
Figure
6-46. Plug the white connector into the right side of the filter and the black
Black Wire
Figure 6-46: Dual Connectors on P/N 2338088
Chapter 6 - Table
D
LS S
S
ISCOVERY
YSTEM
ERVICE
Add wires to
this filter.
White Wire
Page 147
M
ANUAL