Routine Work Panel - 3D Histech Pannoramic 250 FLASH II User Manual

Pannoramic 250 FLASH II 1.18.1 User's Guide

4.3.1 Routine work panel

The Routine work panel provides basic digitization functions. Features are described in the
forthcoming section.
To insert and remove slides
To move the lowest magazine in the input stack to the loading position click
•
To move the magazine into the output stack, click
•
To move a selected slide from its magazine to the specimen holder either enter its position
•
number to the Current slide field and click
To return the slide to its magazine, click
•
To move all magazines to the output stack, click
•
May 29, 2014 – Rev. 1
Figure 32 – Routine work panel
3DHISTECH Ltd.
.
.
.
.
4 Software Description
.
52(137)