3D Histech Pannoramic 250 FLASH II User Manual page 113

Pannoramic 250 FLASH II 1.18.1 User's Guide
•
•
Figure 83 – Scan To Server window during the barcode parsing process
•
•
May 29, 2014 – Rev. 1
With the Multi fill option the selected slides will be given the same input data to
their specific fields. Profile, Folder, Case, and Block fields can be auto-filled this way
by clicking the drop-down lists at the Multi fill section at the bottom of the window.
Rows can be selected one by one clicking the row headings while the Ctrl button on
your keyboard is pressed down, or select the entire form by clicking the gray field at
the top left corner.
To erase/reset fields to default, click the Reset all button. If modification is done to
the folder tree of the CaseCenter server while the Scan To Server window is open,
click Update Tree to refresh the tree view.
Click Done when finished or Cancel to quit the Scan To Server window. If you save
the form, slides will be scanned to server according to the data recorded in the form
after you start scanning.
After restarting the scanner software a dialog window appears when scanning to
server is performed previously. Click Yes to use the last used server, or No to get
back to local scan mode.
Figure 84 – Reconnecting to the previously used server
3DHISTECH Ltd.
4 Software Description
113(137)