3D Histech Pannoramic 250 FLASH II User Manual page 133

Pannoramic 250 FLASH II 1.18.1 User's Guide
Operating data
Intended site
Electrical protection class
Internal protection degree
Electrical safety
Over-voltage category
Radio interference suppression
Noise immunity
Base unit input voltage
Power consumption of the complete device
Fuses
Light sources
Halogen lamp (transmitted light operation)
Average service life of halogen lamp
Lamp module for HXP 120 (fluorescent option)
Average service life of Mercury short arc reflector lamp
Lumencor light source
Estimated service life of the Lumencor's light source
This User's Guide describes Lumencor Spectra and HXP 120 as light sources. The X-Cite 120
illumination unit may also be used as a substitute light source.
Slide identification
Slides are identified by a VRmagic VRmC-8+ PRO preview camera. Label area is saved as image and
barcode is interpreted as a character string, with capability for interpretation of the following types of
1D and 2D barcodes:
Interleaved 2 of 5
•
Code39 (ASCII encoding)
•
Code93 (ASCII encoding)
•
May 29, 2014 – Rev. 1
closed room facilities
I
IP 20
in compliance with DIN EN 61010-1:2001, DIN EN 61010-2-
101:2002 (IEC 61010-1:2001, IEC 61010-2-101:2002)
II
in accordance with EN 55011 class B
in accordance with EN 61326-2-6:2005
100-240V AC
max 350W
2x T3.15A, 250V
Precision-Aligned Pulsed Xenon Light Source
2 x 10 9 flashes
120 W
2000h
SPECTRA Light Engine 6
75 000 h
3DHISTECH Ltd.
6 Technical Data
133(137)