3D Histech Pannoramic 250 FLASH II User Manual page 112

Pannoramic 250 FLASH II 1.18.1 User's Guide
•
•
•
May 29, 2014 – Rev. 1
The barcode '1234567890', and a mask '1-3' result that the first three characters of
the barcode will be displayed and set as slide name (123). Case and Block fields can
be set this way as well, if necessary.
NOTE: When filling slide data fields, press TAB to move to the next cell.
Figure 81 – Profile selection
Profiles can be added by selecting a list entry from the Profile drop-down list.
Select a folder where the slide will be scanned to. After clicking the Folder drop-
down list, a path will be displayed in which the destination folder can be selected.
Figure 82 – Folder selection
Fill in the Case and Block fields in case you do not use masks, or select an item from
the drop-down list.
3DHISTECH Ltd.
4 Software Description
112(137)