Using Profiles - 3D Histech Pannoramic 250 FLASH II User Manual

Pannoramic 250 FLASH II 1.18.1 User's Guide

4.8 Using Profiles

Saved profile settings cannot be applied if using a different type of
Pannoramic scanner.
If you want to scan a group of slides, it is advised to save your settings previously in a profile and
continue scanning in Automatic mode. You can save the following settings in a profile:
Scan Mode
Brightfield
•
Fluorescent
•
Scan Options
Focus frequency (in Fluorescent mode)
•
Focus frequency (in Brightfield mode)
•
Compression procedure
•
Use of a fixed compensation image (in Brightfield mode - ON/OFF)
•
Use of stitching (ON/OFF)
•
Determination of the area to be scanned
Use of automatic threshold specimen
•
Use of specimen threshold value
•
Use of Brightfield/Darkfield preview image
•
Use of marker pen threshold and specimen threshold values
•
Use of scan everything within marked area (ON/OFF)
•
Remove coverslip function (ON/OFF)
•
Filling of holes (ON/OFF)
•
May 29, 2014 – Rev. 1
Note:
3DHISTECH Ltd.
4 Software Description
114(137)