Pannoramic 250 FLASH II 1.18.1 User's Guide
4 Software Description
4.1 Starting / Exiting the Pannoramic Scanner Software
4.1.1 Starting the software
For the scan software you can choose from different scanning modes at the startup of the program.
1. To start the program, double-click on the program icon on the desktop or start it from Start
Menu\ All Programs \ 3DHISTECH \ Pannoramic Scanner
2. During start-up, all motors, the preview camera and the scan camera are initialized. After
successful initialization, the program displays a Mode selection window.
The selection window displays two Brightfield and Fluorescent scan modes:
•
•
May 29, 2014 – Rev. 1
Figure 18 – Mode selection window
Automatic
for digitizing multiple slides
•
Manual
for digitizing individual slides
•
where contrast ratio is critical due to specimen staining and where ideal
•
parameters need to be determined for subsequent use in Automatic mode
if profiles need to be defined for the Automatic mode
•
3DHISTECH Ltd.
4 Software Description
36(137)