Pannoramic 250 FLASH II 1.18.1 User's Guide
Set the TMA block type in this panel.
1. Select the shape of the TMA spots (Rectangle spots or Circle spots).
2. Enter the number of rows and columns in the Rows and Columns fields or select the
3. Enter the distance between two spots on the X and the Y axis in μm (in the Spot
4. Enter the average diameter of the spots in the Side length of ... (μm) field or select
Grid panel
The Grid panel displays the previously set grid settings
May 29, 2014 – Rev. 1
appropriate values with the arrows.
distance X (μm) and Spot distance Y (μm) fields or select the appropriate values
with the arrows.
the appropriate value with the arrows.
Figure 44 – TMA tool: Grid
3DHISTECH Ltd.
4 Software Description
64(137)