Routine Work Tab - 3D Histech Pannoramic DESK II User Manual

Pannoramic DESK II 1.22 User's Guide

4.3.1 Routine work tab

The Routine work tab provides the following basic digitization functions:
To insert and remove slides
To move the specimen holder to load/unload position, click
•
Follow instructions detailed in section 3.2.
•
Ensure that the slide is not tilted, and that it rests perfectly horizontally
on the stage.
To enter the slide name
To enter the slide name manually, type it into the Slide Name field.
•
To use the barcode as a slide name if a compatible barcode sticker is affixed on the slide,
•
click
barcode string will be displayed in the Slide Name field.
You can also find the
recommended to go through all the settings before clicking it.
June 24, 2016 - Rev. 1
Figure 19 – Routine work tab
Caution!
. First, the software automatically detects the barcode on the slide, then the
3DHISTECH Ltd.
button on this tab that you can start scanning with, but it is
4 Software Description
.
41(76)