Image Compensation - 3D Histech Pannoramic 250 FLASH II User Manual

Pannoramic 250 FLASH II 1.18.1 User's Guide
MicroPDF417
•
Maxicode
•
QR code
•
1D barcodes with check digit (CDV)
You can select the following 1D barcodes with check digit (CDV):
Code 39
•
Interleaved 2 of 5
•
The check digit is always the last digit of the barcode. It is an additional checking number.
If you select Exclude check digit, then the check digit number will also be analyzed as a barcode
number.
Foreground Color
You can select the following foreground color of the barcode area:
Black
•
White
•
Barcode Image Compensation
Click Use barcode compensation image to use the previously created compensation image for
scanning the label area. You can take a new compensation image from a slide with blank barcode
sticker by clicking
The compensation image improves the effectiveness of barcode reading.

4.2.2 Image Compensation

You can use a saved compensation image whenever compensation-related issues occur (deriving
from the slide, illumination, staining or embedding medium irregularities). To set compensation
parameters properly, follow the instructions below.
By moving the mouse over the
are interested in.
May 29, 2014 – Rev. 1
. You need a slide with a label area covered fully by a white sticker.
buttons, the software displays information about the setting you
3DHISTECH Ltd.
4 Software Description
40(137)