3D Histech Pannoramic 250 FLASH II User Manual page 21

Pannoramic 250 FLASH II 1.18.1 User's Guide
Preview
Figure 6 – Preview camera (1), Brightfield preview lamp (2), and Dark-field preview lamp (3)
At fluorescent sections the dark-field preview makes the fluorescent samples detectable even for the
user and for the automatic marking algorithm. By detecting the sample the fluorescent scanning will
be much faster since the software will not waste time on empty FOVs.
Base Unit options
Pannoramic 250 FLASH II Basic Brightfield Option – base unit equipped with CIS VCC-
•
FC60FR19CL camera for Brightfield scanning (no fluorescent accessories included)
Pannoramic 250 FLASH II Basic Fluorescence Option – base unit completely equipped with
•
CIS VCC-FC60FR19CL camera for Brightfield scanning; with AxioCam camera and HXP 120
illumination unit, trigger cable and filters for fluorescence scanning
Pannoramic 250 FLASH II Advanced Fluorescence Option – base unit completely equipped
•
with CIS VCC-FC60FR19CL camera for Brightfield scanning, and with pco.edge 4.2 camera
and Lumencor fluorescence illumination unit, trigger cable and filters for fluorescence
scanning
NOTE: In case Lumencor light source is ordered, the custom light source and filter modules
can be variable. For more information, please contact 3DHISTECH customer service.
Objectives
Carl-Zeiss Plan-Apochromat 20× / NA 0.8
•
Carl-Zeiss Plan-Apochromat 40× Corr/ NA 0.95
•
Do not change correction collar settings on 40x objective, if you need it
to be set, contact customer service.
May 29, 2014 – Rev. 1
Warning!
3DHISTECH Ltd.
1 Product Description
21(137)