Inserting And Removing Slides; Insert Slides Into A Magazine - 3D Histech Pannoramic 250 FLASH II User Manual

Pannoramic 250 FLASH II 1.18.1 User's Guide
Ensure that a marginal space of 1-2 mm remains on all sides between
the sticker and the label area outer limits. It is vital for barcode
identification.
Do not let barcode sticker protrude from slide edges, or stick on the
coverslip surface (3).
Do not stick more than 4 barcode stickers over each other and the
overall thickness must must be kept below 1.65 mm (including the
barcodes and the slide).

3.3 Inserting and Removing Slides

3.3.1 Insert slides into a magazine

May 29, 2014 – Rev. 1
Caution!
Figure 13 – Inserting slides into a magazine
3DHISTECH Ltd.
3 Operating Slides and Magazines
31(137)