3D Histech Pannoramic 250 FLASH II User Manual page 105

Pannoramic 250 FLASH II 1.18.1 User's Guide
Example for barcode usage
The Profile mask row is inactive if the option Apply one profile to all
slides is active.
Generate name if no name was defined
•
By choosing this option, a name is generated automatically in the following format if no
name was defined and there is no barcode:
<magazine number>M<slide position>
The number before M represents the magazine number. The number after M represents the
slide position. In this example, the name indicates a slide in magazine 1, position 10.
You can also define names for the slides in the table, by entering names into the column
Names / Barcodes. You can also define profiles in the selection boxes in column Profiles if
you intend to use different profiles for slides.
May 29, 2014 – Rev. 1
Barcode: Folder_Vir_123_prof_n
•
Folder is the folder for saving
•
Vir is the name of the virtual slide
•
123_prof_n is the profile name
•
The barcode control will then look like the following:
•
Folder mask 1: 1-6
•
Folder mask 2: <empty>
•
Folder mask 3: <empty>
•
Folder mask 4: <empty>
•
Folder mask 5: <empty>
•
Name mask: 8-10
•
Profile mask: 12-21
•
Note:
Current Profile is the profile loaded in Routine Work / Scan Profiles.
(for example, 1M10)
3DHISTECH Ltd.
4 Software Description
105(137)