3D Histech Pannoramic 250 FLASH II User Manual page 42

Pannoramic 250 FLASH II 1.18.1 User's Guide
Preview Settings
There might be specks or minor etches on the surface of the compensation slide that
require modifying the threshold settings. Therefore, the scanner will not use those areas for
the creation of the compensation images.
•
•
To create the compensation image(s), click
the process.
The Progress bar at the bottom of the window displays the progress of the compensation image
creation.
Image Browser
This function displays the created compensation image.
May 29, 2014 – Rev. 1
Current threshold
To modify the threshold settings, set the desired threshold level in the box.
Use Selection Box
Select this if you have a compensation slide that has only certain predefined areas
for creating compensation images (due to the type of the compensation slide, or
because the compensation slide has faded in some areas).
Figure 22 – Image Browser
3DHISTECH Ltd.
4 Software Description
. Click the Stop button to interrupt
42(137)