Connectors And Cables - 3D Histech Pannoramic 250 FLASH II User Manual

Pannoramic 250 FLASH II 1.18.1.1 User's Guide
1. Status display
2. DVD drive (RW)
3. Power on/off button
4. Earphone and microphone 3.5mm Jack ports
5. 2x USB port
6. Power supply connector
7. PS/2 mouse port
8. PS/2 keyboard port
9. 4x USB port
10. 2x USB port
11. Network port
12. Matrox Radient eCL Camera Link ports (for CIS and pco.edge 4.2 cameras)
13. 1x FireWire port (IEEE 1394 A for AxioCam MRm Rev3 camera)

2.2 Connectors and cables

Control – USB (between scanner and control computer)
•
Preview camera – USB cable (between scanner and control computer)
•
AxioCam – FireWire 1394 A cable (between AxioCam camera and control computer)
•
CIS – a pair of CameraLink cables (between CIS camera and control computer)
•
pco.edge 4.2 – a pair of CameraLink cables (between pco.edge 4.2 camera and control
•
computer)
Video cable (between monitor and control computer)
•
Power supply cable (between 230V/110V and monitor)
•
Power supply cable (between 230V/110V and control computer)
•
Power supply cable (between 230V/110V and Pannoramic 250 FLASH II main unit)
•
Optical cable (between HXP 120 fluorescent illumination unit and scanner)
•
Trigger cable (between pco.edge 4.2 and Lumencor fluorescent illumination unit)
•
USB-to-RS232 serial communication cable (between Lumencor fluorescent illumination unit
•
and control computer)
Power supply cable (between 230V/110V and HXP 120 fluorescent illumination unit)
•
May 29, 2014 – Rev. 1 3DHISTECH Ltd.
2 Installation
25(137)