3D Histech Pannoramic 250 FLASH II User Manual page 53

Pannoramic 250 FLASH II 1.18.1 User's Guide
To enter the slide name
To enter the slide name manually, type it into the Slide Name field.
•
You can also use the barcode as a slide name if a compatible barcode sticker is affixed on
•
the slide. To do this, click
and the number or string will appear in the Slide Name field.
You can also find the
recommended to go through all the settings before clicking it.
To administer profiles, use the Scan Profiles field.
The current profile name is displayed at the bottom left corner of the screen.
•
To save the current profile, click Save.
•
To select an existing profile from the selection menu, click Load.
•
To delete the current profile click Delete.
•
The Objective position field sets the objective changer to the appropriate position.
To access the Scan Options window, click
These settings are only applicable if you do not use profiles. If you use
profiles, the settings stored in them are used.
May 29, 2014 – Rev. 1
button on this panel that you can start scanning with, but it is
Note:
3DHISTECH Ltd.
. It will automatically detect the barcode on the slide,
.
4 Software Description
53(137)