3D Histech Pannoramic 250 FLASH II User Manual page 70

Pannoramic 250 FLASH II 1.18.1 User's Guide
Toolbar for live images
The toolbar is only available for the displayed live image, but not available for camera
images during digitization.
•
•
•
•
•
•
•
•
•
•
•
•
Status bar
•
•
•
May 29, 2014 – Rev. 1
– Zoom in
– Zoom out
– One pixel on the monitor corresponds to one pixel on the camera
– The live image completely fills the display area
– Displays or hides the vertical and horizontal scale bars
– Displays the magnifier window
– Activates red marking on overexposed pixels
– Recalculates exposure time (useful if too many overexposed pixels were
detected)
– Calculates white balance (only for color cameras)
– Saves the current image as BMP or JPEG file
Fast live mode – live images are displayed with a frequency of at least 10
images/second. If an exposure time is set to more than 100 ms, the pixel values are
multiplied accordingly (for example, if an exposure time of 200 ms is set, the pixel
values are multiplied by 2, and the exposure time is reset to 100 ms). Therefore the
resulting images will have a higher noise level.
This function is useful for fluorescent live view where in spite of the higher noise
level, the resulting image will be refreshed as in normal mode.
Normal live mode – images are taken with an auto-specified exposure time.
Current position of the cursor related to the live image
RGB value of current pixel
Zoom level of the current live image
3DHISTECH Ltd.
4 Software Description
70(137)