3D Histech Pannoramic 250 FLASH II User Manual page 34

Pannoramic 250 FLASH II 1.18.1 User's Guide
3. Slide down the magazine on the input guide rails until it rests on the gear wheels (6) or
magazines.
Make sure that the magazines are properly placed between the rails,
because it can cause serious damages in the feeding mechanism.
The input stack can be filled with a maximum of 9 magazines in
addition to the one in the magazine loader.
May 29, 2014 – Rev. 1
Figure 15 – Gear wheels
Caution!
Figure 16 – Misplaced magazine
Note:
3DHISTECH Ltd.
3 Operating Slides and Magazines
34(137)