3D Histech Pannoramic 250 FLASH II User Manual page 19

Pannoramic 250 FLASH II 1.18.1 User's Guide
Motorized camera changer
You can fit two cameras into the Pannoramic 250 FLASH II on the first adapter (1) (fluorescent
position) and the second adapter (2) (brightfield position) at the same time. They are set and
switched by the software automatically, without any human assistance.
This system also enables switching between brightfield and fluorescent scanning by one click.
The installation of the cameras in Pannoramic 250 FLASH II must be
carried out by trained professionals!
In any other case the warranty will be automatically voided.
Supplier/Distributor is not liable for any damages caused by an
installation not carried out by professional person.
May 29, 2014 – Rev. 1
Figure 4 – Motorized camera changer
Warning!
3DHISTECH Ltd.
1 Product Description
19(137)