Microscope Settings - 3D Histech Pannoramic 250 FLASH II User Manual

Pannoramic 250 FLASH II 1.18.1 User's Guide

4.2.3 Microscope Settings

By moving the mouse over the
are interested in.
Base Settings
Objective type
You can select the type and the magnification level of the objectives.
Camera type
Select the correct camera types in Pos. 1 and Pos. 2 fields, then the software automatically
loads the camera settings upon clicking the Test and Apply Camera Settings button.
Save the settings by clicking
May 29, 2014 – Rev. 1
buttons, the software displays information about the setting you
Figure 23 – Base Settings panel
.
3DHISTECH Ltd.
4 Software Description
43(137)