3D Histech Pannoramic 250 FLASH II User Manual page 62

Pannoramic 250 FLASH II 1.18.1 User's Guide
You can select the area to be scanned with the different tools on the toolbar:
•
•
•
•
To undo your last action, click
To position the specimen holder that holds the current slide, click Position sample
then click on the area of interest on the preview image. This will define the Live image that
you can access from the Focus panel.
To display the original image created by the preview camera (Brightfield or Darkfield), click
.
To shrink or enlarge the preview image, set the zoom level at the left Size selection box
(100%-600%). To fit the preview image to the preview area, click Fit.
Choose from the Scanned
box.
•
•
May 29, 2014 – Rev. 1
Square tool
Ellipse tool
Polygon tool: you can finish the selection process with the polygon tool by
double-clicking with the mouse.
TMA tool
To add the selected areas to the preview, select the Scanned
To delete the selected areas from the preview, select the Not scanned
Figure 41 – Not scanned selection
(maximum of 40 changes).
or the Not scanned
3DHISTECH Ltd.
4 Software Description
option from the right selection
option.
and
option.
62(137)