Inserting And Removing Slides - 3D Histech Pannoramic DESK II User Manual

Pannoramic DESK II 1.22 User's Guide

3.2 Inserting and Removing Slides

Pannoramic DESK II features a manual feed for one single slide.
To insert a slide
Incorrect slide insertion may break the glass. Always make sure that
slides are correctly inserted in the tray. The edge of the broken area of
the slide is sharp and its removal can lead to injury and contagion!
Broken slide can be removed only by a well-trained person!
1. Click
load/unload position.
2. Open the slide insert door (1) by pushing it to the left.
When opening the slide insert door, fingers may be pinched during
operation.
June 24, 2016 – Rev. 1
Caution!
Figure 6 – Inserting and removing a slide
in Pannoramic DESK II control software. The specimen holder moves to the
Caution!
3DHISTECH Ltd.
3 Preparing Slides
23(76)