Using Profiles - 3D Histech Pannoramic DESK II User Manual

Pannoramic DESK II 1.22 User's Guide

4.5 Using Profiles

Saved profile settings cannot be applied if using a different type of
Pannoramic scanner.
The following settings are saved in a profile:
Scan Mode
Brightfield
•
Scan Options
Focus frequency
•
Compression procedure
•
Use of a fixed compensation image (ON/OFF)
•
Use of Save focus quality (ON/OFF)
•
Use of Stitching (ON/OFF)
•
Use of original Bayer size (ON/OFF) – available if Point Grey Grasshopper 3 camera is used
•
Determination of the area to be scanned
Use of automatic threshold specimen
•
Use of specimen threshold value
•
Use of marker pen threshold and specimen threshold values
•
Remove coverslip function (ON/OFF)
•
Use of scan everything within marked area function (ON/OFF)
•
Filling of holes (ON/OFF)
•
Use of removing specks according to the set value (ON/OFF)
•
Use of saved scan area
•
Use selection box (ON/OFF)
•
Other settings
Limitation of focus range (ON/OFF)
•
Use of extended focus or Z-stack step size and focus level
•
June 24, 2016 - Rev. 1
Note:
3DHISTECH Ltd.
4 Software Description
63(76)