Check For Presence Of Curve Table (Ctabexists); Delete Curve Tables (Ctabdel) - Siemens SINUMERIK 840D sl Programming Manual

9.2.2

Check for presence of curve table (CTABEXISTS)

Function
The CTABEXISTS command can be used to check if a specific curve table number is present
in the NC memory.
Syntax
CTABEXISTS(<n>)
Significance
CTABEXISTS
<n>
9.2.3

Delete curve tables (CTABDEL)

Function
CTABDEL can be used to delete curve tables.
Note
Curve tables that are active in an axis coupling cannot be deleted.
Syntax
CTABDEL(<n>)
CTABDEL(<n>,<m>)
CTABDEL(<n>,<m>,<memory location>)
CTABDEL ()
CTABDEL(,,<memory location>)
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
Checks for the presence of curve table number <n> in the static or
dynamic NC memory.
0 Table does not exist
1 Table exists
Number (ID) of curve table
Axis couplings
9.2 Curve tables (CTAB)
585