Verify The Drive Backplane - Oracle SPARC T8-2 Service Manual

9. Verify that the component was successfully installed.
See "Verify the Drive Backplane" on page
Related Information
"Remove the Drive Backplane" on page 159
■
"Verify the Drive Backplane" on page 163
■

Verify the Drive Backplane

1. At the Oracle ILOM prompt, start the fault management shell.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
faultmgmtsp>
2.
Type fmadm faulty to check for faults.
If faults are reported, see
■
If no faults are reported, then the drive backplane has been replaced
■
successfully.
Related Information
"Remove the Drive Backplane" on page 159
■
"Install the Drive Backplane" on page 160
■
163.
"Detecting and Managing Faults" on page 27
Verify the Drive Backplane
Servicing the Drive Backplane
.
163