Oracle SPARC T8-2 Service Manual page 30

Identify Faulted Components
Description : A FRU has been inserted into a location where it is not
Response
Impact
Action
faultmgmtsp>
In this example, a fault is displayed that includes these details:
Date and time of the fault (2015-01-16/17:55:26).
■
UUID (f4ee56c-9fdd-ca19-efb5-ae39675dfee3), which is unique to each fault.
■
Message ID (SPT-8000-PX), which can be used to obtain additional fault information from
■
Knowledge Base articles.
Use the message ID to obtain more information about this type of fault.
2.
a.
Obtain the message ID from console output (SPT-8000-PX in the example
above).
b.
Go to https://support.oracle.com, and search on the message ID in the
Knowledge tab, or type the URL from the Action field into a browser.
3. Follow the suggested actions to repair the fault.
4. If necessary, clear the fault manually.
See "Clear a Fault Manually" on page
Related Information
"Log In to Oracle ILOM (Service)" on page 28
■
"Identify Disabled Components" on page 31
■
"Component Names Displayed by Diagnostic Software" on page 32
■
30 SPARC T8-2 Server Service Manual • June 2019
Part_Number : 12345678+13+2
Serial_Number : 1248DC140
supported.
: The service required LED on the chassis may be illuminated.
: The FRU may not be usable in its current location.
: Please refer to the associated reference document at
http://support.oracle.com/msg/SPT-8000-PX for the latest
service procedures and policies regarding this diagnosis.
43.