Table of Contents
Advertisement
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. Static discharges can cause the components to fail.
1.
Take the necessary ESD precautions.
See
"Prevent ESD Damage" on page
2.
Press the eUSB drive into the socket on the motherboard.
3.
Tighten the screw to secure the drive to the motherboard.
Install memory risers CM0/MR0, CM0/MR2 and CM0/MR3.
4.
See
"Install a Memory Riser" on page
5.
Return the server to operation.
See
"Returning the Server to Operation" on page
55.
104.
171.
Install the eUSB Drive
Servicing the eUSB Drive
117
Advertisement
Table of Contents
