Enable And Verify A Dimm - Oracle SPARC T8-2 Service Manual

Enable and Verify a DIMM

Tighten the screw six turns to secure.
4. Return the server to operation.
See "Returning the Server to Operation" on page
Related Information
"Memory Riser and DIMM Configuration" on page 89
■
"Remove a DIMM" on page 100
■
"Enable and Verify a DIMM" on page 106
■
Enable and Verify a DIMM
1.
At the Oracle ILOM prompt type show faulty.
If the output indicates a POST-detected fault, go to step 2.
■
106 SPARC T8-2 Server Service Manual • June 2019
171.