Verify A Fan Module - Oracle SPARC T8-2 Service Manual

Related Information
"Return the Server to the Normal Operating Position" on page
■
"Remove a Fan Module" on page 77
■
"Verify a Fan Module" on page 81
■

Verify a Fan Module

1. Verify that the Service Required LED on the replaced fan module is not lit.
See "Fan Module LEDs" on page
2. At the Oracle ILOM prompt, start the fault management shell.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
faultmgmtsp>
3.
Type fmadm faulty to check for faults.
If faults are reported, see
■
If no faults are reported, then the component has been replaced successfully.
■
4. Consider these possibilities:
If any of the LEDs are illuminated, see
■
If none of the LEDs are illuminated, the fan module has been replaced successfully.
■
Related Information
"Determine Which Fan Module Is Faulty" on page 77
■
"Front Panel Components (Service)" on page 13
■
"Rear Panel Components (Service)" on page 15
■
76.
"Detecting and Managing Faults" on page
"Interpreting LEDs" on page
Verify a Fan Module
173.
27.
33.
Servicing Fan Modules 81