Install The Eusb Drive - Oracle SPARC T8-2 Service Manual

Install the eUSB Drive

See "Remove a Memory Riser" on page
3. Loosen the screw that attaches the eUSB drive to the motherboard.
Retain the screw to use with the new eUSB drive.
4. Lift the eUSB drive up to disconnect it from the motherboard.
Install a new eUSB drive.
5.
See "Install the eUSB Drive" on page
Related Information
"Install the eUSB Drive" on page 116
■
Install the eUSB Drive
This is a cold-service procedure that can be performed by a customer. Power down the server
completely before performing this procedure.
116 SPARC T8-2 Server Service Manual • June 2019
98.
116.