Configuration Procedure - Fujitsu ETERNUS DX500 S3 Configuration Manual

Chapter 9 Solution Configuration
9.1 Continuous Business
■

Configuration Procedure

Connect business servers to the ETERNUS DX storage systems (Primary and Secondary storage systems) via
switches, and then connect the management server (ETERNUS SF Storage Cruiser) to the ETERNUS DX storage
systems via LANs.
To perform automatic failover, connect the Storage Cluster controller to ETERNUS DX storage systems (Pri-
mary and Secondary storage systems) via the LAN in order to detect trouble in the ETERNUS DX storage sys-
tems.
To configure Storage Cluster, perform the settings with ETERNUS SF Storage Cruiser.
●
Required Environment
Two ETERNUS DX storage systems are required.
To use Storage Cluster, the ETERNUS SF Storage Cruiser Storage Cluster option is necessary.
A Storage Cluster controller is required to perform automatic failover.
●
Configuration Procedure
Use ETERNUS SF Storage Cruiser to perform the following settings.
Registration of the ETERNUS DX
•
License Registration
•
Registration and configuration for servers and FC switches
•
• Storage Cluster configuration settings
Operation volume preparation
•
Access path settings
•
Storage Cluster controller settings (when performing automatic failover)
•
For more details on the settings for ETERNUS SF Storage Cruiser, refer to "ETERNUS SF Storage Cruiser Opera-
tion Guide".
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
137
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0