SMC Networks EX600-SEC Series Operation Manual page 91

•When the slot and channel are not specified, "--" will be displayed.
•When there is no log, "No error" will be displayed.
Error code
0 -
1 Short circuit has occurred.
2 Analogue input value has exceeded the lower limit of the range.
3 Analogue input value has exceeded the upper limit of the range.
4 -
5 -
6 Broken wire is detected.
7 Analogue value (value set by user) has exceeded the upper limit.
8 Analogue value (value set by user) has exceeded the lower limit.
9 ON/OFF count has exceeded the set value.
10 to 15 -
16 Power supply voltage level for control and inputs is abnormal.
17 Power supply voltage level for output is abnormal.
18 -
19 Connection error between the units. (When operating)
20 Connection error between the units. (When power is supplied)
21 -
22 System error.
23 Internal component has failed.
Fig. Log format
Table. Error code list
Content
-90-
No.EX##-OMO0027