Default Setting; Output Will Be Held Last State - SMC Networks EX600-SEC Series Operation Manual

•Analogue output unit parameters (1)
Parameter
No.
(H.T. Symbol)
The power
Generates error
supply short
circuit per unit when the
1 detection for short circuit of the
the output output device is
device detected.
(SC_MonSs)
Analogue Sets the range of
2 output range the analogue output
(Range) device per channel.
Sets analogue data
Analogue
type which is
3 data format
output to master
(D_Format)
per unit.
Generates error
User setting
per channel when
value upper
the output value
limit error
exceeds the set
(Upr_Lmt)
value.
Sets the scale
4
upper limit.
Scale upper Generates error
∗ 1
limit setting per channel when
(UpLm/Scl) the output value
exceeds the upper
limit.
Generates error
User setting
per channel when
value lower
the output value
limit error
exceeds the set
(Lwr_Lmt)
value.
Sets the scale
5
lower limit.
Scale lower Generates error
∗ 1
limit setting per channel when
(LwLm/Scl) the output value
falls below the
lower limit.
Output setting
Set output per
for
channel when
6 communication
communication is
∗ 3
error
abnormal.
(Fault_MA)
Definition Item
Enable
Disable
0..10 V
0..5 V
1..5 V
0..20 mA
4..20 mA
Offset binary
Sign &
Magnitude
2's Complement
Scaled
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Content
Generates an error.
Does not generate an
error.
Selects the analogue
output range.
Offset binary.
Signed binary.
2's complement.
Scale conversion type.
Generates an error.
Does not generate an
error.
Generates an error.
Val: -32766 to 32767
Does not generate an
∗ 3
error.
Val: -32766 to 32767
Generates an error.
Does not generate an
error.
Generates an error.
Val: -32767 to 32766
Does not generate an
∗ 3
error.
Val: -32767 to 32766
Output will be user fault
∗ 2
value.
Output will be held last
state.
-49-
Parameter
setting
Default
By
setting
Ether
CAT
○
○
0..10 V ○
○
○
∗ 2 ∗ 3
○
○
∗ 3
○
Val: 1000
∗ 2 ∗ 3
○
○
∗ 3
○
Val: 0
○
○
No.EX##-OMO0027
By
H.T.
○
○
○
○
○
○