Modbus /Tcp Tom - ICP DAS USA PDS-700 User Manual

6.1. Modbus/TCP to Modbus/RTU Gateway
PPDS(M)-700(D)-MTCP series can work as a Modbus/TCP to Modbus/RTU gateway
that support most SCADA/HMI communications based on the Modbus/TCP protocol.
Step 1: Configuring COM Ports for Modbus Gateway
Enter the IP address of the PPDS series module in the Address field and press "Enter"
1.
to connect to the PPDS series module.
2. Click the "Modbus Gateway Setting" in the web page to configure the Modbus setting
for COM ports. Click the "Apply the current setting" and "Update" button to update it to
PPDS-700-MTCP.
- 97 -