Circuit Pack Installation; Circuit Pack Slot Loading - Avaya S8700 Manual

76
Installing the S8700 IP Connect
Non-Allowable Circuit packs and Circuit Modules — Continued
Apparatus code
TN1657
TN2169
TN2170
TN2182/B
TN2198
TN2202
TN2208
TN2210
TN2214/B
TN2215
TN2238
TN2301
TN2305/2306
TN2308
TN2401
TN2404

Circuit Pack Installation

!
CAUTION:
When handling circuit packs or any components of an Avaya G600 Media Gateway,
always wear an authorized wrist ground strap. Connect the strap to the ground connector
provided on the media gateway.

Circuit Pack Slot Loading

Check the reinstalled circuit packs. All of the circuit pack slots in the Avaya G600 are
1
"universal slots." Any slot can contain any type of port circuit pack except that the
TN2312AP IP Server Interface circuit pack must be installed in slot 2 of media gateway
A. See
2 Load all port circuit packs. See
for the recommended circuit pack layout.
Name
Disk Drive
Alarm Interface
Ethernet Interface
Tone-Clock - Tone Detector and Call Classifier
ISDN-BRI 2-Wire U Interface
50-Hz French Ring Generator
AUDIX
Tone Generator
Digital Line, 24-Port, 2-Wire DCP - Category B only
Analog Line, 16-Port 2-Wire - Category B only
ATM Trunk Interface (Multi-Mode)
Survivable Remote Logic Switch
ATM Interface (Single-Mode)
Direct Inward Dialing Trunk
Network Control/Packet Interface
Processor
''Avaya G600 Media Gateway and slot numbering'' on page
''Circuit pack installation order (loading)'' on page 77
May 2002
Allowable
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
77.