Administer The Ip Server Interface - Avaya S8700 Manual

Administer the IP Server Interface

NOTE:
Do this procedure only if the translations were not input earlier.
The following administration uses the services laptop computer connected to the active media
server and uses Avaya Site Administration.
1 Type change system-parameters ipserver-interface and press
change system-parameters ipserver-interface
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
SERVER INFORMATION
IPSI Host Name Prefix:
Primary Control Subnet Address: 172. 22.
Secondary Control Subnet Address:
OPTIONS
Switch Identifier: A
IPSI Control of Port Networks: enabled
NOTE: * indicates data changed on the Server
Set the Switch Identifier: field to the switch ID letter (A thru J; A is the default
2
setting).
3 Set the IPSI Control of Port Networks: field to enabled.
Type add ipserver-interface PNnumber and press
4
information.
In the Host: field, type in the static IP address for the IPSI in that port network.
5
add ipserver-interface 1
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 1
Primary IPSI
------------
Location: 1A02
Host: 172.22.22.174
DHCP ID: ipsi-A01a
0. 0*
. . .
Enter
QoS Parameters
--------------
Call Control DiffServ: 46
May 2002
Installing the S8700 IP Connect
.
Enter
Page 1 of 1
to add the IPSI circuit pack
Socket Encryption? y
Call Control 802.1p: 6
37