Test The Ipsi Circuit Pack; Test Expansion Interface Circuit Packs (S8700 Multi-Connect Only) - Avaya S8700 Manual

192
Installing the S8700 IP Connect

Test the IPSI Circuit Pack

Use Avaya Site Administration.
1 Type test ipserver-interface UUC and press
components within the IPSI circuit pack.
2 Verify the screen displays Test Results screen similar to
Screen — Page 1, S8700 Multi-Connect'' on page
Sample IPSI 01A Test Results Screen
test ipserver-interface 1a
Port
01A
01A
01A0201
01A0201
01A0202
01A0202
01A0203
01A0203
01A0204
01A0204
01A0205
01A0205
01A0206
01A0206
01A0207
Test Expansion Interface Circuit Packs (S8700
Multi-Connect only)
Check each Expansion Interface (EI) circuit pack in the media gateway.
Type test board UUCSS where UUCSS is the cabinet, carrier, and slot for an Expansion
1
Interface (EI) circuit pack in the media gateway, and press
NOTE:
Labels on the port network and carrier and on the strip under the circuit pack contain this
information.
Verify the screen displays test results similar to
2
Interface Board 2A01—S8700 Multi-Connect'' on page
2a01.
If any result is FAIL, check the connections for the fiber optic link.
3
4 Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
—
TEST RESULTS
Maintenance Name Alt. Name Test No. Result
TONE-BD
TONE-BD
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
ETR-PT
press CANCEL to quit --
May 2002
to test all clock and packet interface
Enter
''Sample IPSI 01A Test Results
192.
Page 1, S8700 Multi-Connect
46 PASS
52 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
43 PASS
42 PASS
press NEXT PAGE to continue
Enter
''Sample Test Results for Expansion
193. This example is for board
Page 1
Error Code
.