Installing The License And Avaya Authentication Files - Avaya S8700 Manual

Problem
Can't access IPSI for static addressing
No "V" on IPSI LED
"V" on IPSI LED is not filled in
Installing the License and Avaya Authentication
Files
Problem
Can't get files from RFA site
License file won't install
Media server is in no license mode
ASG doesn't work
Can't place any calls
Solution
- Make sure you are plugged into the Services (top) port
- Make sure the ARP cache is cleared. In an MS-DOS window,
type arp -d 192.11.13.6 and press
- IPSI is not connected to Ethernet switch or network. Connect
cable to bottom port on IPSI faceplate and to the Ethernet
switch.
- IPSI does not have an IP address assigned to it.
- IPSI has not been administered.
Solution
- Provided wrong SAP number.
- Make sure there are not two license files on the server. If so,
delete one of them.
- Normal when license file is first installed because it cannot see
the IPSIs; they do not have IP addresses yet.
- Re-install Avaya authentication files.
- Media server is in no license mode.
May 2002
Installing an S8700 IP Connect
.
Enter
205