Avaya S8700 Manual page 94

94
Installing the S8700 IP Connect
5 Type in the following information for the TN2302AP IP Media Processor and TN799DP
C-LAN:
NOTE:
Enable the Ethernet port last, after you have filled in the information in the other fields.
6 Press
Refer to the Administration for Network Connectivity for Avaya MultiVantage Software for
more information on these administration steps and for the steps to administer IP Softphones
and H.323 trunks.
• Set Slot field to UUCSS, where UUCSS is the cabinet, carrier, and slot.
• The Code and SFX fields are automatically populated with TN799DP and
TN2302AP.
• In the Node Name field type the same node name entered on the Node Name
screen.
• In the Subnet Mask field use the default setting unless you are given a different
subnet mask.
In the Gateway Address field use the address you are given or leave blank.
•
• Set the Net Region field to 1 unless you are given a different number.
Set the Enable Eth Pt field to y
•
to save the information and effect the new settings.
Enter
May 2002