Avaya S8700 Manual page 114

114
Installing the S8700 IP Connect
DS1 Cables
Connector Cable
C6C connector cable
C6D connector cable
C6E connector cable
C6F connector cable
Pinout of C6F Cable
Wire Color
White/Green
Green
White/Brown
Brown
White/Slate
Slate
Description and Usage
50-foot (15.2 m) shielded cable equipped with a 50-pin male
connector on one end and a 15-pin male connector on the other
end.
Use this cable to connect a DS1 tie trunk circuit pack to a
Channel Service Unit (CSU).
50-foot (15.2 m) shielded cable equipped with a 50-pin male
connector on each end.
Use this cable to connect a DS1 tie trunks in collocated
cabinets.
100-foot (30.5 m) shielded cable equipped with a 50-pin male
connector on one end and a 50-pin female connector on the
other end.
Use this cable as an "extension" cable between the DS1 tie
trunk circuit pack and other connector cables.
50-foot (15.2 m) shielded cable equipped with a 50-pin male
connector on one end and a three inch (7.62 cm) stub on the
other end.
Use this cable to connect the DS1 tie trunk circuit pack to
channel multiplexers requiring hardwired connections.
Pin
Lead Designation Number
L I * (High Side)
47
L I
22
LO 48
LO* (High Side) 23
LBACK2 49
LBACK1 24
May 2002