182
Installing the S8700 IP Connect
UPS LEDs
The Powerware front panel has the LEDs shown in
182:
LEDs on Powerware 9125 UPS
ledlups KLC 030102
Figure notes
1
2
3
4
After plugging the UPS in, all the LEDs flash briefly. After a self test, the Normal mode LED
flashes, indicating that the UPS is in Standby mode.
For more information on the LEDs, refer to the UPS user's guide that comes with the
Powerware 9125 UPS.
Telephone Console LEDS
Telephones and attendant consoles have some alarm LEDs that must be checked out.
Normal mode indicator
Battery mode indicator
Bypass mode indicator
Test/Alarm reset button
''LEDs on Powerware 9125 UPS'' on page
1
2
3
4
Off button
5
On button
6
7
Bar graph indicators
Alarm indicators
8
May 2002
8
7
5
6