1151A1 And 1151A2 Power Supplies; Important Safety Instructions For 1151A1 And 1151A2 Power Supplies - Avaya S8700 Manual

156
Installing the S8700 IP Connect

1151A1 and 1151A2 Power Supplies

The 1151A1 and 1151A2 power supplies comply with the UL Standard UL 1950, second
edition.
Complies
Certified
Approved
Approved
For safety instructions, see
Supplies'' on page
Power Supplies'' on page
NOTE:
The 1151B1 and 1151B2 power supplies replace the 1151A1 and 1151A2 power supplies
and will be available in Summer 2002.
Important Safety Instructions for 1151A1 and
1151A2 Power Supplies
Please read the following helpful tips. Retain these tips for later use.
When using this power supply, the following safety precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons.
Read and understand all instructions.
•
Follow all warnings and instructions marked on this power supply.
•
• This product can be hazardous if immersed in water. To avoid the possibility of electrical
shock, do not use it near water.
• To reduce the risk of electric shock, do not disassemble this product except to replace
battery.
• This product should be operated only from the type of AC power source indicated on the
label. If you are not sure of the type of AC power being provided, contact a qualified
service person.
• Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it.
• Do not overload wall outlets and extension cords as this can result in the risk of line or
electric shock.
UL 1950
CSA 22.2
EN6950
CE
''Important Safety Instructions for 1151A1 and 1151A2 Power
156. For installation instructions, see
158.
May 2002
''Connect the 1151A1 or 1151A2